Includes Maptuner X with Stages 1-3R programming. More tunes are available in the add ons section of this page
Maptuner X is what many customers have been waiting for! Maptuner X is a consumer hand held ECU flashing device similar to many diesel programmers on the market except with more capability. With it, you can easily flash your vehicle via the app driven, touch screen interface and included cabling. The cable plugs into the OEM diagnostic port. With Maptuner X, you can install the same proven EVP programs. Not only that, Maptuner X has live datalogging capability, DTC Reading/Reset and many other features. With a Plug n Play AFR module, you can monitor and log air fuel ratios in real time! It is also compatible with most Polaris, BRP and Yamaha vehicles meaning you only need one device to tune many vehicles! (additional vehicle tunes must be purchased). You can return your vehicle back to stock at any time!
The development for these tunes consisted of 2000+ dyno runs in our state of the art, climate controlled dyno room. They were then field testing on the trails, desert, dunes and high altitude for driveability and long term durability. We endured 110+ degree California weather to ensure performance at extreme temperatures. After the rigorous field testing routing was completed, they were further proven and refined on the track with our sponsored driver race program.
Evolution Powersports works with top racers in the industry such Marc Burnett, Dustin Jones, Kyle Chaney, Tim Farr, Lonestar, Sean Cook, Elliot Burns, Casey Scherer and others. 6 out of the top 10 drivers in the Lucas Oil Midwest series used EVP tunes & products to help get them to the podium. EVP programming and products are also used by top drivers in GNCC, BITD and SCORE race series with countless podiums. We are confident our tunes are the most powerful, refined and safest tunes on the market. Also, EVP owns 3 development Can AM X3’s. This allows us to do parallel development on stock turbo, consumer tunes while engineering next level products and tunes.
Tune Descriptions:
“R” designation = the turbo wastegate crack pressure must be adjusted for higher boost (see our video on how to do this here) “W” designation = a replacement wastegate actuator is included with the tune “i” designation = big injector tune and includes flow matched injectors New – “X” designation = EXTREME power and is the maximum that can be achieved with the stock turbocharger
The OEM stock 18-19 Can Am X3-R tune produces 14 lbs of boost. EVP Tunes have the below boost and octane ratings. See dyno charts in the photo gallery for horsepower ratings of each tune vs stock
Stage 1 – 16 lbs of boost for stock exhaust – 91 Octane
Stage 2R- 17 lbs of boost for stock muffler with Race Bypass – 91 Octane Stage
Stage 3R- 17 lbs of boost for full exhaust – 91 Octane
New -Stage 3R-93 – 18 lbs of boost for full exhaust – 93 Octane
Stage 3Ri- 17.5 lbs of boost for full exhaust – 91 Octane
Stage 3RWi- 18 lbs of boost, full exhaust – 93 Octane
Stage 4RWi- 20 lbs of boost, full exhaust – 95 Octane
New – “Vmap” Multi Map Stage 4RWi-MM – 20 lbs of boost on Sport mode and 15 lbs of boost on Eco mode – 95/91 Octane
New – Stage 4RWi-X100 -22 lbs of boost, full exhaust – 100 Octane – See updated dyno chart in product photos!
Stage 5RWi– 20 lbs of boost, full exhaust – E85 New
New – Stage 5RWi-X85 – 22 lbs of boost, full exhaust – E85 – See updated dyno chart in product photos!
Tune Features:
New – Revised intercooler fan settings – makes the OEM intercooler far more effective!
New – Left foot braking enabled for 2 foot operation
New – Improved boost response / low to midrange power improvements
New – Launch button for drag racing available – Our on/off switch replaces the OEM override switch which allows Launch Start from a standstill and prevents “low gear” mode. This allows operation of the gas pedal and brake pedal at the same time from a standstill to launch the car HARD!
Speed limits raised / TQ limits removed in Low Gear
Low Gear rev limit increased from 8300 to 8600 RPMS (Stages 1,2,2R,3) and 9000 RPMS (Stages 3R & above)
Speed / TQ limits removed in High Gear
High Gear rev limit increased from 8300 to 8600 RPMS (Stages 1,2,2R,3) and 9000 RPMS (Stages 3R & above)
Improved throttle response in all modes (E-Gas Settings Improved) – Linear throttle rather than the lazy pedal the factory has programmed
Fans set to activate at 165 degrees
Race Start – No need to press the brake to start vehicle
Fueling is corrected for the various stages so no fuel controllers are needed
Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Orders received for products without shipping restrictions on its product page will ship the same business day when received before 12:00 p.m. MST. Orders in high demand will ship under the same guidelines unless there is a backorder. backordered items will be relayed to customer via email within 48hours of purchase date.
At Geiser Performance, we are passionate about enhancing your UTV experience. With years of expertise in the industry, we specialize in providing high-quality parts and accessories designed to elevate performance, safety, and style.
Our dedicated team understands the needs of off-road enthusiasts, ensuring that every product we offer meets the highest standards of durability and reliability.
Whether you're looking to upgrade your ride or repair essential components, we are committed to delivering exceptional service and knowledgeable support to help you get the most out of your UTV.
